With the continuous development of my country's wine industry,Glass Liquor Bottle glass wine bottles are widely used as packaging containers in the wine packaging industry. So how much do you know about the production process of glass wine bottles?
Pre-treatment section. The pre-treatment section of glass wine bottle spraying includes pre-off,Glass Liquor Bottle main off, standard adjustment,Glass Liquor Bottle etc. If it is in the north, the temperature of the main off part should not be too low,Glass Liquor Bottle and heat preservation is required, otherwise the treatment effect is not ideal. Preheating section. After the pre-treatment,Glass Liquor Bottle it will enter the preheating section, which generally takes about eight minutes. The glass bottle can reach the powder spraying chamber better so that the sprayed workpiece has a certain amount of residual heat to increase the adhesion of the powder.
Soot blowing and purification section of glass wine bottles. If the process requirements of the sprayed parts are relatively high, this section is indispensable,Glass Liquor Bottle otherwise if there is a lot of dust on the workpiece,Glass Liquor Bottle the surface of the processed workpiece will have a lot of particles.
Spraying section. This section is more critical. If you want to create a good quality glass bottle,Glass Liquor Bottle you have to spend money to hire a master with good spraying skills. Drying section. At this stage,Glass Liquor Bottle the temperature and baking time should be paid attention to,Glass Liquor Bottle and the drying furnace should not be too far away from the spraying powder room, generally six meters is better.




